The
RB204 module is an A10 Receiver module that has a built in form C relay
capable of switching 30A loads
Characteristics
All devices connected to the RB204 can be switched
by the X10/A10 Transmitters and Interfaces, as well as by the manual
override switch on the module
Easy Push Button Programming to:
-
Set
response to "All Lights On" Command
-
Set
response to "All Units Off" Command
-
Set
response to "All Lights Off" Command
-
Memory feature allows DAIX10 to switch on to the last dim level used
-
Set
response to Status Request
To select 1-16 hours to "Time Out" Relay (Special
Order)
-
X10
Signal Compatible
-
On/Off/Auto Switch on Cover
-
Terminals inside for connection of remote override switch
-
One
Form C Electrically Held Relay
Operation
-
Remote ON/OFF Control of Water Heaters
-
Remote ON/OFF control of HVAC and Unitary Equipment
-
Control High Current Loads
-
Fail-safe Units "OFF" after power failure (use N.O. contacts)
-
Alternate Loads
-
Fail-safe Units "ON" after power failure (use N.C. contacts)
-
Control car park lights
