A10 Dimmer Receiver (micro module)

DAIX10

  

The DAIX10 module is both a dimmable Receiver and A10 Transmitter. The DAIX10 can be mounted behind momentary action light switches, making it possible to switch and dim the lights via both the automation system and with the manual control switches. The momentary switch makes it possible to control dimming from the switch. Normal wall switches are easily converted to momentary switches by simply replacing the actual switch mechanism.

 

 

Characteristics

·         25-250W

·         Suitable for 240V conventional and halogen lighting, as well as low-voltage lighting using dimmable coil wound or electronic transformers (leading or trailing edge)

·         Responds to ‘ALL LIGHTS ON’ and ‘ALL UNITS OFF’ commands

·         Memory feature allows DAIX10 to switch on to the last dim level used

·         Can be set to absolutely lowest dim position

·         Status can be retained after a black out

·         Soft start and dim provides a relaxed ambience

 

 

How it Works

The DAIX10 module is wired to momentary action switches. The DAIX10 can be operated locally (hold down momentary switch for dimming), and can also be controlled via X10 signals commands originating from other Transmitters, Interfaces or remote control devices. Manual control from multiple switches is possible by connecting extra momentary switches in parallel.

 

The DAIX10 responds to the standard X10 commands such as "On", "Off", "All Lights On", "All Units Off". It also receives and responds to dim/bright commands, and will send its dim level to any similarly addressed module. The DAIX10 receives 'extended' X10 commands, meaning it can be sent directly to a certain dim level without needing to first ramp up to 100% like some other X10 dimmer receivers.

 

Installation

Phase and neutral are required to be connected to the DAIX10