|
 |
|
|
Low
Pass Blocking Filter - 20A |
|
|
|
|
In
certain X10 installations it may be possible for an electrical appliance
to generate electrical interference. This random electrical interference
may interfere with the X10 command signal transmission. The AF300 is one
of several troubleshooting products available to address this problem.
The AF300 is a Line Isolation Filter which filters
out X10 command signals and any strong electric clutter at 120 kHz on
the AC line (the frequency of the X10 signal). It provides attenuation
at a 40:1 ratio input to output respectively. It prevents passage of the
X10 command signals or 120 kHz electronic noise from the line side
(primary) to the load side (secondary) and vice versa. The AF300 is for
applications up to 277 volts.
AF300 Installation Schematic
